Xerox WorkCentre 7132 Service Documentation page 956

Figure 5 Removing the Fuser Assembly
9. Remove the Drive Belt from the Pulley. (Figure 6)
Reversion 4.0
WorkCentre 7132
1
Remove the Fuser
Assembly
2
Disconnect the lanyard
for better access
10. Move the bracket to the left. (Figure 7)
January 2007
4-5
1
Remove the Pulley
side guard
NOTE: To remove the Pulley side
guard, rotate the side guard until
the locking tab is visible. Release
the locking tab enough to remove
the side guard.
2
Remove the Drive
Belt from the Pulley
Figure 6 Disengaging the Drive Belt
Repairs/Adjustments
REP 1.1.1