Rep 3.1.1 Ros Unit - Xerox WorkCentre 7132 Service Documentation

REP 3.1.1 ROS Unit

Parts List on PL 3.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
Check that "Ready to Copy" is displayed on the Control Panel display.
1. Switch off the power and disconnect the Power Cord.
2. Remove the Right Side Cover. (REP 10.2.3)
3. Remove the Power Supply. (REP 9.2.3)
4. Remove the ROS Cooling Fan bracket. (Figure 1)
2
Remove the screws
(2)
3
Release the spring latches
and remove the Cooling Fan
Bracket,
Figure 1 Removing the ROS Cooling Fan Bracket
5. Preparing to remove the ROS Assembly. (Figure 2)
Reversion 4.0
WorkCentre 7132
WARNING
CAUTION
1
Disconnect the con-
nector
2
Remove the screws (2)
Figure 2 Preparing to remove the ROS Assembly
6. Removing the ROS Assembly. (Figure 3)
January 2007
4-21
1
Disconnect the connectors (2)
Repairs/Adjustments
REP 3.1.1