Xerox WorkCentre 7132 Service Documentation page 1419

Chain-Link NVM Name
700-411 Electronic Sort Copy Area Size (RAM
Disk)
700-412 Mailbox Area Size (RAM Disk)
700-420 Download Disable Flag
700-421 Product ID to identify downloaded file (first
character)
700-422 Product ID to identify downloaded file (2nd
character)
700-423 Product ID to identify downloaded file (3rd
character)
700-424 Product ID to identify downloaded file (4th
character)
700-425 Product ID to identify downloaded file (5th
character)
700-426 Product ID to identify downloaded file (6th
character)
700-427 Product ID to identify downloaded file (7th
character)
700-428 Product ID to identify downloaded file (8th
character)
700-430 Certificate Credibility (PKI Mode)
700-431 Device Certification Type
700-437 SSL Availability Setting
700-440 S/MIME Availability Setting
700-441 S/MIME Device Certification
700-442 S/MIME Message Digest Algorithm
General procedures information
Controller & Fax NVM List
Table 1 Common
Setup Initial
Range Value Read/Write Description
33M with Read/Write This setting becomes valid only when the HDD is not installed. Do not set other
standard than the situation above. The setting range is from 0 to "current value + amount
memory, of free memory". Setting increment is 1MB Units.
50M with The current value can be checked from the System Settings List of the device,
128M while the amount of free memory can be checked from the Memory Settings
expansion Menu.
memory,
66M with
If a value that is larger than the "current value + amount of free memory" is
256M
entered, every Memory Settings will revert to their Factory Shipment Settings.
expansion
Please make sure that the total of the increased portion does not exceed the
memory,
amount of free memory if the Electronic Sort Print Area is also changed.
and 100M
The Electronic Sort function listed to the left stops when its value is set to "0".
with 386M
However, please do not set only this value to "0". Also set the Electronic Sort
expansion
Print Area to "0" when setting this value to "0".
memory
(TBD)
7M Read/Write Cannot be set (TBD)
0~1 0: Permit Read/Write 0: Permit, 1: Prohibit
- NULL Read/Write ASCII
- NULL Read/Write ASCII
- NULL Read/Write ASCII
- NULL Read/Write ASCII
- NULL Read/Write ASCII
- NULL Read/Write ASCII
- NULL Read/Write ASCII
- NULL Read/Write ASCII
1~3 1: Level 1 Read/Write 1: Level 1, 2: Level 2, 3: Level 3
0~2 0: Not reg- Read/Write 0: Not registered, 1: On (Self-generate), 2: Available (Import)
istered
0~1 0: FALSE Read/Write 0: FALSE Invalid, 1: TRUE Valid
Invalid
0, 1 0: FALSE Read/Write [0: FALSE Invalid, 1: TRUE Valid]
Invalid
0~0xFFFFF 0 Read/Write
FFF
0, 1 0: SHA1 Read/Write [0: SHA1, 1: MD5]
January 2007
6-96
CAUTION
Reversion 4.0
WorkCentre 7132