Xerox WorkCentre 7132 Service Documentation page 630

045-323 Marking Y RAP
BSD-ON:6.4/6.5
There is a marking Y plate control error.
Procedure
Check the connections and wiring between the MCU PWB and the ROS Unit. The
tions and wiring are OK.
Y N
Repair replace as required (PL 11.1, PL 3.1).
Replace the MCU PWB (PL 11.1). If the problem continues, replace the ROS Unit (PL 3.1).
Revision
WorkCentre 7132
045-324 Marking M RAP
BSD-ON:6.4/6.5
There is a marking M plate control error.
Procedure
connec- Check the connections and wiring between the MCU PWB and the ROS Unit. The
tions and wiring are OK.
Y N
Repair replace as required (PL 11.1, PL 3.1).
Replace the MCU PWB (PL 11.1). If the problem continues, replace the ROS Unit (PL 3.1).
January 2007
2-597
connec-
Status-indicator-raps
045-323, 045-324