Xerox WorkCentre 7132 Service Documentation page 888

124-393 CRU OEM System 2 (2)
OEM (Original Equipment Manufacturer) CRUM control failed in system 2.
Procedure
Check the electrical connections on the ESS PWB and MCU PWB. The
securely connected.
Y N
Connect the connectors.
Turn on the power again. The problem persists.
Y N
Return to Service Call Procedures.
Perform GP 4, repair the problem by master SYS2.
If the problem persists, replace the ESS PWB (PL 11.2).
Revision
WorkCentre 7132
124-701 Side Tray to Center Tray RAP
The output destination was changed by the customer from the Side Tray to the Center Tray.
Procedure
connectors are No action necessary.
January 2007
2-855
Status-indicator-raps
124-393, 124-701