Xerox WorkCentre 7132 Service Documentation page 747

092-662 Humidity Sensor RAP
BSD-ON:9.4A
There is a humidity sensor failure.
Procedure
Check the operating voltages between the Temperature/Humidity Sensor and the MCU PWB.
The voltages are correct.
Y N
Verify that the circuit is not damaged. If no damage is found, replace the MCU PWB (PL
11.1).
Replace the Temperature/Humidity Sensor (PL 11.1).
Status-indicator-raps
092-662
January 2007
2-714
Revision
WorkCentre 7132