Rep 12.1.2 Tray 3 Feeder (2Tm) - Xerox WorkCentre 7132 Service Documentation

REP 12.1.2 Tray 3 Feeder (2TM)

Parts List on PL 14.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
Check that "Ready to Copy" is displayed on the Control Panel display.
1. Pull out Tray 2/3.
2. Remove the Foot Covers. (Figure 1)
2
Remove the Cover
Figure 1 Removing the Foot Covers
3. Remove the Left Lower Cover. (Figure 2)
Repairs/Adjustments
REP 12.1.2
WARNING
CAUTION
1
Loosen the screw (1)
1
Remove the screws (2)
Figure 2 Removing the Left Lower Cover
4. Open the Left Cover Assembly.
5. Remove the screws. (Figure 3)
1. Remove the screws.
January 2007
4-104
Reversion 4.0
WorkCentre 7132