1
Remove the screws (4)
Figure 2 Removing the Rotary Motor
Reversion 4.0
WorkCentre 7132
REP 4.2.7 Developer Material
Parts List on PL 5.1
Removal
1.
Remove the Developer Housing. (REP 4.1.1)
2.
Place several sheets of paper on a work surface and place the Developer Housing on the
paper.
Be careful to avoid getting Developer Material on the Developer Housing drive gears. If some
developer does contaminate the gears, clean the gears and make sure that the gears rotates
smoothly.
3.
Remove the screw from the cover on the Developer Housing. (Figure 1)
2
Remove the Rotary
Motor
4.
Unlatch the tabs on the Developer Housing Cover. (Figure 2)
January 2007
4-43
CAUTION
Remove the screw (1)
Figure 1 Removing the screw from the Developer Housing Cover
Repairs/Adjustments
REP 4.2.7