Xerox WorkCentre 7132 Service Documentation page 1090

Figure 4 Removing the Top Cover Assembly
7. Unfasten the Wire Harness. (Figure 5)
1. Disconnect the connector.
2. Remove the Topping Screw (1).
3. Remove the Earth Wire.
4. Remove the Tapping Screw (2).
5. Unfasten the Harness Guide.
Reversion 4.0
WorkCentre 7132
Figure 5 Unfastening the Wire Harness
8. Remove the Wire Harness from the Top Cover. (Figure 6)
1. Disconnect the connector.
2. Remove the Wire Harness from the Harness Guide.
3. Remove the Wire Harnesses (3) from the square hole and remove the Top Cover.
January 2007
4-139
Repairs/Adjustments
REP 15.4.2