Xerox WorkCentre 7132 Service Documentation page 906

134-210 Fax Controller Parameter RAP
BSD-ON:17.1
The parameter value is incorrect or the required parameter is not sent.
Initial Actions
Power Off/On
Procedure
Pull out and insert the FCB PWB (PL 11.3). The problem persists.
Y N
Return to Service Call Procedures.
Check the electrical connections on the FCB PWB (PL 11.3). The connectors are securely
connected.
Y N
Connect the connectors.
Switch on the power. The problem persists.
Y N
Return to Service Call Procedures.
Replace the FCB PWB (PL 11.3).
Revision
WorkCentre 7132
134-211 FCB PWB RAP
BSD-ON:17.1
A failure is detected on the FCB PWB.
Initial Actions
Power Off/On
Procedure
Check the electrical connections on the FCB PWB (PL 11.3).
If the problem persists replace the FCB PWB (PL 11.3).
January 2007
2-873
Status-indicator-raps
134-210, 134-211