Xerox WorkCentre 7132 Service Documentation page 628

045-310 Image RAP
BSD-ON:6.2
The IIT image is not ready for transfer.
Procedure
Check the connectors and cables between the IIT/IPS PWB, CCD PWB, and the ESS PWB.
The connectors and cables are OK.
Y N
Repair or replace as required (PL 13.3, PL 13.4, PL 11.2)
Power OFF and then ON. The problem continues.
Y N
Rerun the job.
Replace the IIT/IPS PWB (PL 13.3).
Revision
WorkCentre 7132
045-311 Controller Communications RAP
BSD-ON:6.2
There is a Controller communications fault.
Procedure
Check the following PWBs for loose connections and/or defective cables:
• Printer PWB (PL 11.2)
• ESS PWB (PL 11.2).
• MCU PWB (PL 11.1).
Repair and/or replace as required.
January 2007
2-595
Status-indicator-raps
045-310, 045-311