Xerox WorkCentre 7132 Service Documentation page 758

093-916 Toner K CRUM not in position Failure
BSD-ON:9.1
K Toner CRUM not in position Failure.
Initial Actions
• Ensure that the Black Toner Cartridge is seated correctly.
• Ensure that the Toner Cartridge Door is closed.
Procedure
Fault codes 093-970 (Y), 093-971 (M), and 093-972 (C) are also present on the UI.
Y N
Replace the Black Toner Cartridge (PL 5.2).
Replace the Toner CRUM (Toner Cartridge Door) (PL 5.1).
If the fault codes are still present, replace the MCU PWB (PL 11.1).
Revision
WorkCentre 7132
093-924 Toner K Crum Communication Failure
BSD-ON:9.1
K Toner CRUM Comm Failure.
Initial Actions
• Ensure that the Black Toner Cartridge is seated correctly.
• Ensure that the Toner Cartridge Door is closed.
Procedure
Fault codes 093-940 (Y), 093-941 (M), and 093-942 (C) are also present on the UI.
Y N
Replace the Black Toner Cartridge (PL 5.2).
Replace the Toner CRUM (Toner Cartridge Door) (PL 5.1).
If the fault codes are still present, replace the MCU PWB (PL 11.1).
January 2007
2-725
Status-indicator-raps
093-916, 093-924