Table of Contents
Advertisement
System administration
Add a DN range
Follow this procedure to assign a DN range.
Assigning a DN range manually
1. Open Internet Explorer and enter the following URL in the address field: localhost/
2. Click Add Number Range.
3. In the From field, enter the first number in the range. If you add a range consisting
4. In the To field, enter the last number in the range.
5. Click OK.
Importing a DN range from a .csv file
Importing a DN range from a .csv file
1. Click Browse. A dialog appears.
2. Browse to the .csv file that contains the extension numbers (phone book).
3. Click OK.
4. Click the Subscriptions menu to verify that the extension numbers imported
132
SIP DECT Fundamentals
cds.
The DAP manager IP DECT page appears.
The Add Number Range page appears.
of one number only, proceed to step 5.
The file contents is imported.
properly.
Comments? infodev@avaya.com
October 2012
Advertisement
Table of Contents
