Contents Of Engineering Labels; Figure B-7 Binding The Label For The Power Cable; Figure B-8 Printed Parts On The Label For Signal Cables - Huawei Quidway S5300 Series Quick Start Manual

Quidway S5300 Series Ethernet Switches
Quick Start

Figure B-7 Binding the Label for the Power Cable

B.1.6 Contents of Engineering Labels
Contents of Labels for Power Cables
Labels for power cables are only affixed on one side of the identification plates. On the labels,
there is information (the part after the mark "TO:") about the location of the device on the other
end of the cable, like the location of control cabinet, distribution box or power socket.
Contents of Labels for Signal Cables
The two sides of the label affixed on the signal cable carry information about the location of the
ports connected to both ends of the cable.
the labels affixed to the signal cables.
l
l
l

Figure B-8 Printed parts on the label for signal cables

Seen from the cabling end of the equipment, the text part of the label is on the right side of the
cable. The side with "TO:" that is facing outside carries the location information of the opposite
end; and the other side carries the location information of the local end.
Issue 01 (2008-12-26)
Area 1 contains the location information of the local end of the cable.
Area 2 (with the mark "TO:") contains the location information of the opposite end of the
cable.
Area 3 has been folded up inside the label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
B Engineering Labels for Cables
Figure B-8 shows the information on both sides of
B-9