Show Monitor Items As A Trend Plot - YASKAWA GA800 Programming Manual

3.4 Keypad Operation
5.
Push or
6.
Push or
• Push (Default) to set the parameters to the factory default.
• Push (Min/Max) to move between the minimum value and maximum value.
7.
Push to keep the changes.
The configuration procedure is complete.
◆

Show Monitor Items as a Trend Plot

The procedure in this section shows how to show the selected monitor data as a trend plot.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
3.
Push or
562
to select [Trend Plot Time Scale Setting], then push
to select the specified digit, then push
, push (Back) to show [Home] on
to select [Monitors], then push
.
or to select the correct number.
.
.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming