H3: Analog Inputs - YASKAWA GA800 Programming Manual

A - H2-30
[Comparator 2 On-Delay Time]
Note:
The drive compares the monitors set with H2-26 as absolute values.
■
69: External Power 24V Supply
Setting Value Function
69 External Power 24V Supply
ON : An external 24V power supply supplies power.
OFF : An external 24V power supply does not supply power.
■
6A: Data Logger Error
Setting Value Function
6A Data Logger Error
■
90 to 93: DWEZ Digital Outputs 1 to 4
Setting Value Function
90 to 93 DWEZ Digital Outputs 1 to
4
■
A0 to A7: DWEZ Extended Digital Output 1 to 8
Setting Value Function
A0 to A7 DWEZ Extended Digital
Outputs 1 to 8
■
100 to 1A7: Inverse Outputs of 0 to A7
Setting Value Function
100 to 1A7 Inverse Outputs of 0 to A7
For example, set H2-xx = 10E for the inverse output of E [Fault].
◆

H3: Analog Inputs

WARNING! Sudden Movement Hazard. Do test runs and examine the drive to make sure that the command references are correct.
If you set the command reference incorrectly, it can cause damage to the drive or serious injury or death.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
Figure 2.102 Comparator 2 Output Time Chart
V/f CL-V/f OLV CLV AOLV
The terminal activates when there is an external 24V power supply between terminals PS-AC.
V/f CL-V/f OLV CLV AOLV
The terminal activates when the drive detects LoG [Com Error / Abnormal SD card].
V/f CL-V/f OLV CLV AOLV
Sets the DriveWorksEZ digital output. Refer to the DriveWorksEZ online manual for more information.
V/f CL-V/f OLV CLV AOLV
Sets the digital output for the DriveWorksEZ DO-A3 option card. Refer to the DriveWorksEZ online manual for more information.
V/f CL-V/f OLV CLV AOLV
Causes inverse output of the function for the selected MFDO. Uses the last two digits of 1xx to select which function to inversely
output.
B - H2-31
[Comparator 2 Off-Delay Time]
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
2.8 H: Terminal Functions
405
2