YASKAWA GA800 Programming Manual page 348

2.7 F: Options
■
F6-53: DeviceNet PPA Setting
No.
Name
(Hex.)
F6-53 DeviceNet PPA Setting
(03C4)
Note:
If F6-52 [DeviceNet PCA Setting] and F6-53 [DeviceNet PPA Setting] are not correct, the value is reset to default.
■
F6-54: DeviceNet Idle Fault Detection
No.
Name
(Hex.)
F6-54 DeviceNet Idle Fault
Detection
(03C5)
0 : Enabled
1 : Disabled, No Fault Detection
Does not detect EF0 issues.
2 : Vendor Specific
3 : RUN Forward
4 : RUN Reverse
■
F6-55: DeviceNet Baud Rate Monitor
No.
Name
(Hex.)
F6-55 DeviceNet Baud Rate
Monitor
(03C6)
0 : 125 kbps
1 : 250 kbps
2 : 500 kbps
■
F6-56: DeviceNet Speed Scaling
No.
Name
(Hex.)
F6-56 DeviceNet Speed Scaling
(03D7)
■
F6-57: DeviceNet Current Scaling
No.
Name
(Hex.)
F6-57 DeviceNet Current Scaling
(03D8)
■
F6-58: DeviceNet Torque Scaling
No.
Name
(Hex.)
F6-58 DeviceNet Torque Scaling
(03D9)
348
V/f CL-V/f OLV CLV AOLV
Sets the format of data that the drive sends to the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the function to detect EF0 [Option Card External Fault] when the drive does not receive data
from the DeviceNet master.
V/f CL-V/f OLV CLV AOLV
Sets the function to see the actual DeviceNet communications speed using the keypad. This
parameter functions as a monitor only.
V/f CL-V/f OLV CLV AOLV
Sets the speed scale for DeviceNet communication.
V/f CL-V/f OLV CLV AOLV
Sets the current scale of the DeviceNet communication master.
V/f CL-V/f OLV CLV AOLV
Sets the torque scale of the DeviceNet communication master.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
Default
(Range)
71
(0 - 255)
Default
(Range)
0
(0 - 4)
Default
(Range)
0
(0 - 2)
Default
(Range)
0
(-15 - +15)
Default
(Range)
0
(-15 - +15)
Default
(Range)
0
(-15 - +15)