YASKAWA GA800 Programming Manual page 515

The initial setup screen shows a menu where you can select the display language, set the date, time, and other basic
settings. When you set this parameter to 0, the drive will not show this screen each time you energize the drive.
0 : No
The drive will not show the initial setup display screen each time you energize the drive. The drive will show the
Home screen.
1 : Yes
When you input the Run command before you energize the drive or when the you turn on the Run command while the
drive shows the initial setup screen, the drive will replace the initial setup screen with the Home screen.
■
o1-40: Home Screen Display Selection
No.
Name
(Hex.)
o1-40 Home Screen Display
Selection
(11BD)
RUN
0 : Custom Monitor
1 : Bar Graph
2 : Analog Gauge
3 : Trend Plot
■
o1-41: 1st Monitor Area Selection
No.
Name
(Hex.)
o1-41 1st Monitor Area Selection
(11C1)
RUN
0 : +/- Area ( - o1-42 ~ o1-42 )
1 : + Area ( 0 ~ o1-42 )
2 : - Area ( - o1-42 ~ 0 )
■
o1-42: 1st Monitor Area Setting
No.
Name
(Hex.)
o1-42 1st Monitor Area Setting
(11C2)
RUN
■
o1-43: 2nd Monitor Area Selection
No.
Name
(Hex.)
o1-43 2nd Monitor Area Selection
(11C3)
RUN
0 : +/- Area ( - o1-44 ~ o1-44 )
1 : + Area ( 0 ~ o1-44 )
2 : - Area ( - o1-44 ~ 0 )
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
V/f CL-V/f OLV CLV AOLV
Sets the monitor display mode for the Home screen. This parameter is only available when using an
LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the horizontal range used to display the monitor set in o1-24 [Custom Monitor 1] as a bar graph.
This parameter is only available when using an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis value used to display the monitor set in o1-24 [Custom Monitor 1] as a bar
graph. This parameter is only available when using an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Selects the horizontal range used to display the monitor set in o1-25 [Custom Monitor 2] as a bar
graph. This parameter is only available when using an LCD keypad.
2.11 o: Keypad-Related Settings
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default
(Range)
0
(0 - 3)
Default
(Range)
0
(0 - 2)
Default
(Range)
100.0%
(0.0 - 100.0%)
Default
(Range)
0
(0 - 2)
2
515