Save A Backup Of Parameters - YASKAWA GA800 Programming Manual

3.4 Keypad Operation
◆

Save a Backup of Parameters

You can save a backup of the drive parameters to the keypad. The keypad can store parameter setting values for a
maximum of four drives in different storage areas. Making backups of the parameter settings can save time when
setting parameters after replacing a drive. If you set up more than one drive, you can copy the parameter settings from
a drive that completed a test run to the other drives.
Note:
• Be sure to stop the monitor before backing up parameters.
• While making a backup, the drive will not accept Run commands.
• The DriveWorksEZ PC software password is required to back up qx-xx [DriveWorksEZ Parameter] and rx-xx [DWEZ Connection
Parameter]. If an incorrect password is entered, the drive detects PWEr [DWEZ Password Missmatch].
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push (Menu).
3.
Push or
4.
Push or
5.
Push or
566
, push
to select [Parameter Backup/Restore], then push
to select the items to back up, then push
to select [Backup (drive → keypad)], then push
(Back), and then push
.
.
.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
to show [Home].