YASKAWA GA800 Programming Manual page 537

■
T2-08: Number of PM Motor Poles
No.
Name
(Hex.)
T2-08 Number of PM Motor Poles
(0734)
■
T2-09: PM Motor Base Speed
No.
Name
(Hex.)
T2-09 PM Motor Base Speed
(0731)
■
T2-10: PM Motor Stator Resistance
No.
Name
(Hex.)
T2-10 PM Motor Stator Resistance
(0754)
Note:
This parameter does not set line-to-line resistance.
■
T2-11: PM Motor d-Axis Inductance
No.
Name
(Hex.)
T2-11 PM Motor d-Axis
Inductance
(0735)
■
T2-12: PM Motor q-Axis Inductance
No.
Name
(Hex.)
T2-12 PM Motor q-Axis
Inductance
(0736)
■
T2-13: Back-EMF Units Selection
No.
Name
(Hex.)
T2-13 Back-EMF Units Selection
(0755)
0 : mV/(rev/min)
1 : mV/(rad/s)
Note:
• When T2-13 = 0, the drive will use E5-24 [PM Back-EMF L-L Vrms (mV/rpm)] and will automatically set E5-09 [PM Back-EMF Vpeak
(mV/(rad/s))] = 0.0.
• When T2-13 = 1, the drive will use E5-09 and will automatically set E5-24 = 0.0.
■
T2-14: Back-EMF Voltage Constant (Ke)
No.
Name
(Hex.)
T2-14 Back-EMF Voltage Constant
(Ke)
(0737)
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
V/f CL-V/f OLV CLV AOLV
Sets the number of motor poles.
V/f CL-V/f OLV CLV AOLV
Sets the motor base speed (min -1 (r/min)).
V/f CL-V/f OLV CLV AOLV
Sets the stator resistance for each motor phase.
V/f CL-V/f OLV CLV AOLV
Sets the d-axis inductance of the motor on a per phase basis.
V/f CL-V/f OLV CLV AOLV
Sets the q-Axis inductance of the motor on a per phase basis.
V/f CL-V/f OLV CLV AOLV
Sets the units that the drive uses to set the induced voltage constant.
V/f CL-V/f OLV CLV AOLV
Sets the motor induced voltage constant (Ke).
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
2.12 T: Auto-Tuning
Default
(Range)
4
(2 - 48)
Default
(Range)
-1
1750 min (r/min)
(0 - 34500 min -1 (r/min))
Default
(Range)
Determined by T2-02
(0.000 - 65.000 Ω)
Default
(Range)
Determined by T2-02
(0.00 - 600.00 mH)
Default
(Range)
Determined by T2-02
(0.00 - 600.00 mH)
Default
(Range)
0
(0, 1)
Default
(Range)
2
Determined by T2-13
(0.0 - 2000.0)
537