Delete Parameters Backed Up To The Keypad - YASKAWA GA800 Programming Manual

4.
Push or
5.
Push or
6.
Push or
The keypad shows "End" when the parameter settings backed up in the keypad agree with the parameter settings
copied to the drive.
Note:
The keypad shows vFyE [Parameters do not Match] when the parameter settings backed up in the keypad do not agree with the parameter
settings copied to the drive. Push one of the keys to return to the screen in Step 6.
◆

Delete Parameters Backed Up to the Keypad

This procedure deletes the parameters that were backed up to the keypad.
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push (Menu).
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
to select the item to verify, then push
to select [Verify (drive → keypad)], then push
to select the data to verify, then push
, push
.
.
.
(Back), and then push
3.4 Keypad Operation
to show [Home].
3
569