O: Keypad-Related Settings; O1: Keypad Display Selection - YASKAWA GA800 Programming Manual

2.11 o: Keypad-Related Settings

2.11

o: Keypad-Related Settings

o parameters set keypad functions.
Note:
You cannot set these parameters with the optional LED keypad.
No.
LCD Contrast Adjustment
o1-05
Custom Monitor 1 to 12
o1-24 to o1-35:
LCD Backlight Brightness
o1-36
LCD Backlight ON/OFF Selection
o1-37
o1-38 LCD Backlight Off-Delay
Show Initial Setup Screen
o1-39
Home Screen Display Selection
o1-40
o1-41 to o1-46: 1st to 3rd Monitor Area Selections/Settings
Trend Plot 1 or 2 Scale Settings
o1-47 to o1-51:
o1-55 to o1-56: Analog Gauge Area Selection/Setting
bCE Detection Selection
o2-27
◆

o1: Keypad Display Selection

o1 parameters select the parameters shown on the initial keypad screen and to configure the parameter setting units
and display units. These parameters also adjust the backlight and contrast of the LCD display.
■
Home Screen Display Format
o1-40 [Home Screen Display Selection] changes the display of the monitor shown on the Home screen. You can show
numerical values or one of these three displays on the Home screen monitor:
Bar Graph Display
A - Select Ux-xx [Monitors] with o1-24,
o1-25, and o1-26.
B - Configure display regions with o1-
41, o1-43, and o1-45.
Analog Gauge Display
A - Select Ux-xx [Monitors] with o1-24.
B - Configure display regions with o1-
56.
510
Table 2.72 Parameters You Cannot Set with the LED Keypad
Name No.
Select Backup/Restore Location
o3-04
Select Items to Backup/Restore
o3-05
Auto Parameter Backup Selection
o3-06
Auto Parameter Backup Interval
o3-07
o4-22 Time Format
Date Format
o4-23
bAT Detection Selection
o4-24
o5-01 Log Start/Stop Selection
Log Sampling Interval
o5-02
o5-03 to o5-12: Log Monitor Data 1 to 10
C - Select display ranges with o1-42,
o1-44, and o1-46.
C - Select display ranges with o1-55.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
Name