O2: Keypad Operation - YASKAWA GA800 Programming Manual

■
o1-51: Trend Plot Time Scale Setting
No.
Name
(Hex.)
o1-51 Trend Plot Time Scale
Setting
(11CB)
RUN
■
o1-55: Analog Gauge Area Selection
No.
Name
(Hex.)
o1-55 Analog Gauge Area
Selection
(11EE)
RUN
0 : +/- Area ( - o1-56 ~ o1-56 )
1 : + Area ( 0 ~ o1-56 )
■
o1-56: Analog Gauge Area Setting
No.
Name
(Hex.)
o1-56 Analog Gauge Area Setting
(11EF)
RUN
■
o1-58: Motor Power Unit Selection
No.
Name
(Hex.)
o1-58 Motor Power Unit Selection
(3125)
The drive shows these parameter values in the set units:
• E2-11 [Motor Rated Power]
• E4-11 [Motor 2 Rated Power]
• E5-02 [PM Motor Rated Power]
• E9-07 [Motor Rated Power]
• T1-02 [Motor Rated Power]
• T2-04 [PM Motor Rated Power]
• T4-08 [Motor Rated Capacity]
0 : kW
Shows the motor output in kW units.
1 : HP
Shows the motor output in HP units.
◆

o2: Keypad Operation

■
o2-01: LO/RE Key Function Selection
No.
Name
(Hex.)
o2-01 LO/RE Key Function
Selection
(0505)
0 : Disabled
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
V/f CL-V/f OLV CLV AOLV
Sets the time scale (horizontal axis) to display the trend plot. When you change this setting, the drive
automatically adjusts the data sampling time. This parameter is only available when using an LCD
keypad.
V/f CL-V/f OLV CLV AOLV
Sets the range used to display the monitor set in o1-24 [Custom Monitor 1] as an analog gauge. This
parameter is only available when using an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the value used to display the monitor set in o1-24 [Custom Monitor 1] as an analog meter. This
parameter is only available when using an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the setting unit for parameters that set the motor rated power.
V/f CL-V/f OLV CLV AOLV
Sets the function that lets you use
2.11 o: Keypad-Related Settings
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
to switch between LOCAL and REMOTE Modes.
Default
(Range)
300 s
(1 - 3600 s)
Default
(Range)
1
(0, 1)
Default
(Range)
100.0%
(0.0 - 100.0%)
Default
(Range)
1
(0, 1)
Default
(Range)
2
1
(0, 1)
517