9.
Push
or
The Setup Wizard procedure is complete.
◆
Disable the Initial Setup Screen
Do the steps in this procedure to not show the initial start-up screen when the drive is energized.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push
(Menu).
3.
Push
/
to select [Initial Setup], then push
4.
Push
/
to select [Show Initial Setup Screen], then push
5.
Push
/
to select [No], then push
• [No]: The keypad will not show the Initial Setup Screen when the drive is energized.
• [Yes]: The keypad will show the Initial Setup Screen when the drive is energized.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
to select [Yes], then push
, push
.
(Back), and then push
.
.
.
3.4 Keypad Operation
to show [Home].
3
581