YASKAWA GA800 Programming Manual page 584

3.4 Keypad Operation
7.
Push or
The configuration procedure is complete.
■
Set the Sampling Time
The procedure in this section shows how to set the sampling time for data logging.
1.
Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push (Menu).
3.
Push or
4.
Push or
5.
Push or
584
to select the monitor number to be logged, then push
, push
to select [Diagnostic Tools], then push
to select [Data Logger], then push
to select [Log Sampling Interval], then push
(Back), and then push
.
(Setup).
.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
.
to show [Home].