Display Monitors As An Analog Gauge; Set Monitoring Items To Be Shown As A Trend Plot - YASKAWA GA800 Programming Manual

3.4 Keypad Operation
The configuration procedure is complete.
◆

Display Monitors as an Analog Gauge

The following explains how to display the contents selected for a monitor as an analog gauge.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not on
2.
Push (Menu).
3.
Push or
4.
Push or
It will be displayed as follows.
◆

Set Monitoring Items to be Shown as a Trend Plot

You must set the items in this figure to display as a trend plot.
558
, push (Back) to show [Home] on
to select [Monitors], then push
to select [Analog Gauge], then push
.
.
.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming