YASKAWA GA800 Programming Manual page 614

4.2 Removing/Reattaching Covers
■
Remove the Front Cover
1.
Remove the terminal cover, keypad, and keypad connector, then insert the end of the keypad connector that
has the tab into the keypad connector holder on the front cover.
A - Keypad
B - Keypad connector
Figure 4.5 Remove the Terminal Cover, Keypad, and Keypad Connector
2.
Loosen the front cover screws.
3.
Push on the four tabs found on each side of the front cover, then pull the front cover forward to remove it from
the drive.
A - Pull forward to remove the front
cover.
4.
Remove the front cover from the drive.
614
Figure 4.6 Loosen the Front Cover Screws
Figure 4.7 Pull Forward to Remove the Front Cover
Figure 4.8 Remove the Front Cover
C - Connector holder
B - Unhook the tabs found on the sides
of the front cover.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming