Restore Modified Parameters To Defaults - YASKAWA GA800 Programming Manual

3.4 Keypad Operation
9.
When you are done changing the value, push
The parameter revision procedure is complete.
◆

Restore Modified Parameters to Defaults

This procedure will set all parameters with changed values to their default settings.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
3.
Push or
4.
Push or
5.
Push .
572
, push (Back) to show [Home] on
to select [Modified Param / Fault Log], then push
to select [Modified Parameters], then push
.
.
.
.
YASKAWA TOEPYAIGA8002B GA800 Drive Programming