YASKAWA GA800 Programming Manual page 519

Ac drive for industrial applications

Hide thumbs Also See for GA800:

Table of Contents

2 : Clear all

Deletes all of the saved user parameter setting values.

Set o2-03 = 2 then push

you delete the user parameter setting values, you cannot set A1-03 = 1110 to initialize parameters.

o2-04: Drive Model (KVA) Selection

Drive Model (KVA)

NOTICE: Set o2-04 [Drive Model Selection] correctly. If you set this parameter incorrectly, it will decrease drive performance, cause

the protection function to operate incorrectly, and cause damage to the drive.

When the setting value of o2-04 changes, related parameter setting values also change. Refer to

ND/HD on page 133

for more information.

These tables list the relation between o2-04 setting values and drive models.

o2-04 Setting

YASKAWA TOEPYAIGA8002B GA800 Drive Programming

to clear the user parameter setting values. The drive will automatically reset o2-03 to 0. If

Sets the Drive Model code. Set this parameter after replacing the control board.

2.11 o: Keypad-Related Settings

OLV/PM AOLV/PM CLV/PM EZOLV

Defaults by Drive Model and Duty Rating

o2-04 Setting

Determined by the drive