YASKAWA GA800 Programming Manual page 56

1.9 F: Options
No.
Name
(Hex.)
F6-30 PROFIBUS-DP Node
Address
(03CB)
F6-31 PROFIBUS-DP Clear
Mode Selection
(03CC)
F6-32 PROFIBUS-DP Data
Format Select
(03CD)
F6-35 CANopen Node ID
Selection
(03D0)
F6-36 CANopen
Communication Speed
(03D1)
F6-45 BACnet Node Address
(02FB)
F6-46 BACnet Baud Rate
(02FC)
F6-47 Rx to Tx Wait Time
(02FD)
F6-48 BACnet Device Object
Identifier0
(02FE)
F6-49 BACnet Device Object
Identifier1
(02FF)
56
V/f CL-V/f OLV CLV AOLV
Sets the node address for PROFIBUS-DP communication. Restart the drive after you
change the parameter setting.
Note:
Be sure to set an address that is different than all other node addresses. Do not set this
parameter to 0.
V/f CL-V/f OLV CLV AOLV
Sets what the drive will do after it receives the Clear Mode command.
0 : Reset
1 : Hold Previous State
V/f CL-V/f OLV CLV AOLV
Sets the data format of PROFIBUS-DP communication. Restart the drive after you change
the parameter setting.
0 : PPO Type
1 : Conventional
2 : PPO (bit0)
3 : PPO (Enter)
4 : Conventional (Enter)
5 : PPO (bit0, Enter)
V/f CL-V/f OLV CLV AOLV
Sets the node address for CANopen communication. Restart the drive after you change the
parameter setting.
Note:
Be sure to set an address that is different than all other node addresses. Do not set this
parameter to 0. Incorrect parameter settings will cause AEr [Station Address Setting
Error] errors and the L.ERR LED on the option will come on.
V/f CL-V/f OLV CLV AOLV
Sets the CANopen communications speed. Restart the drive after you change the parameter
setting.
0 : Detect Automatically
1 : 10 kbps
2 : 20 kbps
3 : 50 kbps
4 : 125 kbps
5 : 250 kbps
6 : 500 kbps
7 : 800 kbps
8 : 1 Mbps
V/f CL-V/f OLV CLV AOLV
Sets the node address for BACnet communication.
Note:
Be sure to set an address that is different than all other node addresses. Do not set this
parameter to 0.
V/f CL-V/f OLV CLV AOLV
Sets the BACnet communications speed.
0 : 1200 bps
1 : 2400 bps
2 : 4800 bps
3 : 9600 bps
4 : 19.2 kbps
5 : 38.4 kbps
6 : 57.6 kbps
7 : 76.8 kbps
8 : 115.2 kbps
V/f CL-V/f OLV CLV AOLV
Sets the wait time for the drive to receive and send BACnet communication.
V/f CL-V/f OLV CLV AOLV
Sets the last word of BACnet communication addresses.
V/f CL-V/f OLV CLV AOLV
Sets the last word of BACnet communication addresses.
Description
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
Default
Ref.
(Range)
0 345
(0 - 125)
0 345
(0, 1)
0 345
(0 - 5)
0 346
(0 - 126)
6 346
(0 - 8)
1 346
(0 - 127)
3 346
(0 - 8)
5 ms 347
(5 - 65 ms)
0 347
(0 - FFFF)
0 347
(0 - 3F)