0B-1 Maintenance and Lubrication:
Maintenance and Lubrication
Maintenance Items
The Normal Maintenance Replacement Parts information will only be found in the Owner's Manual. Refer to the
Maintenance Schedule subsection of the Owner's Manual.
You may be able to use the Search information function using the words Replacement Parts.
Maintenance Schedule (North American Emissions)
The Maintenance Schedule information will only be found in the Owner's Manual.
Refer to the Maintenance Schedule subsection of the Owner's Manual, or you may be able to use the Search
information function using the words Scheduled Maintenance.
Oil Life System Resetting
When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A
CHANGE ENGINE OIL light will come on. Change the engine oil as soon as possible within the next 600 miles (1 000
km). It is possible that, if driving under the best conditions, the oil life system may not indicate that an oil change is
necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the
system must be reset.
If the system is ever reset accidentally, change the engine oil at 3,000 miles (5 000 km) since last oil change.
How to Reset the Engine Oil Life System
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use.
Anytime the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation
occurs where the oil is changed prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.
1. Press the vehicle information button on the driver information center (DIC) until OIL LIFE REMAINING displays.
2. Press and hold the Set/Reset button on the DIC for more than 5 seconds. The oil life will change to 100 percent.
If the light or message comes back on and stays on when you start the vehicle, the Engine Oil Life System has not
reset. Repeat the procedure.
Approximate Fluid Capacities
The following approximate capacities are given in English and metric conversions. See "Fluid and Lubricant
Recommendations" for more information. All capacities are approximate. When adding, be sure to fill to the
approximate level, as recommended in this manual. Recheck fluid level after filling.
Cooling System
Engine Oil with Filter
3.6L Engine RPO LY7
Engine Oil without Filter
3.6L Engine RPO LY7
Fuel Tank
Automatic Transaxle - AF33-5
Automatic - Drain and Refill
Automatic - Complete Overhaul
Transaxle Fluid
Transfer Case - Getrag 760
Fluid and Lubricant Recommendations
The Recommended Fluids and Lubricants information will only be found in the Owner's Manual. Refer to the
Maintenance Schedule subsection of the Owner's Manual.
You may be able to use the Search information function using the words Fluids or Lubricants.
Scheduled Maintenance
Specifications
Application
Specification
Metric
10.0 liters
10.6 quarts
5.2 liters
5.5 quarts
4.8 liters
5.2 quarts
70.0 liters
18.5 gallons
7.1 liters
7.5 quarts
7.8 liters
8.2 quarts
3.9 liters
4.1 quarts
0.8 liters
0.85 quarts
English