Creating The Camera Alignment Marks; Figure 2-8 Creating The Camera Alignment Marks - Polycom ATX 200 Integrator Manual

Creating the Camera Alignment Marks

Camera
Alignment
Marks
C
26.5"
67.3 cm
Polycom, Inc.
To create the camera alignment marks:
Ensure that the vertical centerline of the table aligns with the vertical
1
centerline of the middle display as shown in
Determine the table length required to capture two people on camera in
2
seating positions. The recommended width is 53" (134.6 cm).
Determine the separation distance between the captured field of view.
3
The recommended distance is 6" (15.2 cm).
Keep in mind that the wider the distance, the further it takes before the
cameras' field of views overlap.
Adhere painter's tape to the top of the table to create the camera
4
alignment marks as shown in
Note that all the cameras are normalized to the same width so that they all
have the same scaled factor.
59"
Camera Camera
Alignment Alignment
Marks
C
26.5" 26.5"
26.5"
6-12"
67.3 cm 67.3 cm
67.3 cm
Figure 2-8
Installing the Displays, Table, Cameras, and Chairs
Figure
59"
Camera
Alignment
Marks Marks
C
26.5"
26.5"
6-12"
67.3 cm
67.3 cm
Creating the Camera Alignment Marks
Figure 2-6.
2-8.
59"
26.5"
26.5"
6-12"
67.3 cm
67.3 cm
Camera
Alignment
Marks
2 - 11