Figure 27: C Shaping Filter Selection No. 0 To 3 In Table 11 - Analog Devices ADV7850 Hardware Manual

sdp_c_shape_sel_lqi[4:0], Addr 90 (SDP), Address 0x1D[4:0]
This control is used to allow selection of the C shaping filter for low quality inputs (LQI).
Function
sdp_c_shape_sel_lqi[4:
0]
00010 
sdp_c_shape_sel_scm[4:0], Addr 90 (SDP), Address 0x1E[4:0]
This control is used to allow selection of the C shaping filter for SECAM input signals.
Function
sdp_c_shape_sel_scm[4
:0]
00100 
c_shape_sel_1d[4:0], Addr 90 (SDP), Address 0x97[4:0]
This control is used to select the C shaping filter for the 1D inputs. Refer to the Hardware Manual for details on C shaping filters.
Function
c_shape_sel_1d[4:0]
00010 
Rev. A May 2012
Description
Default
Description
Default
Description
Default
Figure 27: C Shaping Filter Selection No. 0 to 3 in Table 11
106
ADV7850