Delta C2000 Series User Manual page 273

If the drive is not control by CAN or PLC, set Pr.00-10 =1 (Contorl mode = P2P position control) and
set external output terminal to 47 (homing function enable) for homing.
When Pr.00-10 is set to 3, after homing is complete, user must set control mode setting Pr.00-10 to
1 in order to perform P2P position control.
Reserved
~
Display Filter Time (Current)
Settings: 0.001~65.535 sec
Set this parameter to minimize the current fluctuation displayed by digital keypad.
Display Filter Time (Keypad)
Settings: 0.001~65.535 sec
Set this parameter to minimize the display value fluctuation displayed by digital keypad.
Software Version (date)
Settings: Read only
This parameter displays the drive's software version by date.
~
Reserve
Chapter 12 Description of Parameter Settings C2000 Series
12-00-22
Factory Settings: 0.100
Factory Settings: 0.100
Factory Settings: ####