Delta C2000 Series User Manual page 585

API
TADD
162
P
Bit device
X Y M K
S1
S2
D
Notes on operand usage:
Please refer to the function specifications table for each device in
series for the scope of device usage
S : time addend. S
1
The calendar data in hours, minutes, and seconds designated by S
calendar data in hours, minutes, and seconds designated by S
stored as hours, minutes, and seconds in the register designated by D.
If the value of S
command will not execute, M1067, M1068=On, and D1067 will record the error
code 0E1A(HEX).
If the results of addition are greater than or equal to 24 hours, carry flag
M1022=On, and D will display the results of addition minus 24 hours.
If the results of addition are equal to 0 (0 hours, 0 minutes, 0 seconds), zero flag
M1020=On.
X10
D0
D1
D2
8 : 10 : 20
Word device
H KnX KnY KnM T
: time augend. D: time sum.
2
or S exceeds the range, this is considered an operating error, the
1 2
When X10=On, the TADD command will be executed, and the calendar data
in hours, minutes, and seconds designated by D0 to D2 will be added to the
calendar data in hours, minutes, and seconds designated by D10 to D12, and
the results are stored as a total number of hours, minutes, and seconds in the
registers designated by D20 to D22.
TADD D0
hr
8(
*
min +
*
20( sec
*
Calendar data addition
16-bit command (7 STEP)
TADD Continuous
C D
execution type
32-bit command
Flag signal:
D10 D20
hr*
6(
min)
D11 40(
sec
D12
6(
*
6 : 40 : 6
16-93
PLC Function Applications
TADDP Pulse
execution type
M1020 Zero flag
M1022 Carry flag
M1068 Calendar error
is added to the
2
, and the result is
1
hr
D20 14(
*
min*
D21
50(
sec)
D22 26(
14: 50: 26