Delta C2000 Series User Manual page 337

AFM1 DC output setting level
AFM2 DC Output Setting Level
Settings 0.00~100.00%
Reserve
AFM1 Filter Output Time
AFM2 Filter Output Time
Settings 0.00~20.00 Seconds
~ Reserve
MO by AI level
Settings 0: AVI
1: ACI
2: AUI
AI Upper level
Settings -100%~100%
AI Lower level
Settings -100%~100%
This function requires working with Multi-function Output item "67" Analog signal level achieved.
The MO active when AI input level is higher than Pr03-45 AI Upper level. The MO shutoffs when
the AI input is lower that Pr03-46 AI Lower level.
AI Upper level must be higher than AI Lower level
Reserve
~
Analog Input Curve Selection
Settings 0: Regular Curve
1: 3 point curve of AVI
2: 3 point curve of ACI
3: 3 point curve of AVI & ACI
4: 3 point curve of AUI
5: 3 point curve of AVI & AUI
6: 3 point curve of ACI & AUI
7: 3 point curve of AVI & ACI & AUI
Chapter 12 Description of Parameter Settings C2000 Series
12-03-24
Factory Setting: 0.00
Factory Setting: 0.01
Factory Setting: 0
Factory Setting: 50%
Factory Setting: 50%
Factory Setting: 0