Delta C2000 Series User Manual page 274

Group 1 Basic Parameters
Maximum Output Frequency
Settings
This parameter determines the AC motor drive's Maximum Output Frequency. All the AC motor
drive frequency command sources (analog inputs 0 to +10V, 4 to 20mA, 0 to 20mAand ±10V) are
scaled to correspond to the output frequency range.
Output Frequency of Motor 1 base frequency and motor rated frequency
Output Frequency of Motor 2 base frequency and motor rated frequency
Settings
This value should be set according to the rated frequency of the motor as indicated on the motor
nameplate. If the motor is 60Hz, the setting should be 60Hz. If the motor is 50Hz, it should be set to
50Hz.
Output Voltage of Motor 1 base frequency and motor rated frequency
Output Voltage of Motor 2 base frequency and motor rated frequency
Settings
This value should be set according to the rated voltage of the motor as indicated on the motor
nameplate. If the motor is 220V, the setting should be 220.0. If the motor is 200V, it should be set to
200.0.
There are many motor types in the market and the power system for each country is also difference.
The economic and convenience method to solve this problem is to install the AC motor drive. There
is no problem to use with the different voltage and frequency and also can amplify the original
characteristic and life of the motor.
Mid-point Frequency 1 of Motor 1
Settings
Mid-point Voltage 1 of Motor 1
Settings
00.00~600.00Hz
0.00~600.00Hz
230V series: 0.0~255.0V
460V series: 0.0~510.0V
0.00~600.00Hz
230V series: 0.0~240.0V
460V series: 0.0~480.0V
Chapter 12 Description of Parameter Settings C2000 Series
This parameter can be set during operation.
12-01-1
Factory Setting: 60.00/50.00
Factory Setting: 60.00/50.00
Factory Setting: 200.0/400.0
Factory Setting: 3.00
Motor drive with 250HP
and above: 1.50
Factory Setting: 11.0/22.0
Motor drive with 250HP
and above: 10.0