Delta C2000 Series User Manual page 189

Chapter 10 Digital Keypad C2000 Series
5. TQCPG Mode
01: Password Decoder
10-14
Items
1. Password Input (Decode) (P00-07)
2. Password Setting (P00-08)
3. Control Mode (P00-10)
4. Control of Speed Mode (P00-11)
5. Source of the Master Frequency
Command (P00-20)
6. Source of the Operation Command
(P00-21)
7. Max. Operation Frequency (P01-00)
8. Base Frequency of Motor 1 (P01-01)
9. Max. Output Voltage Setting of Motor 1
(P01-02)
10. Full-load Current of Induction Motor 1
(P05-01)
11. Rated Power of Induction Motor 1
(P05-02)
12. Rated Speed of Induction Motor 1
(P05-03)
13. Pole Number of Induction Motor 1
(P05-04)
14. No-load Current of Induction Motor 1
(P05-05)
15. Over-voltage Stall Prevention (P06-01)
16. Software Brake Level (P07-00)
17. Encoder Type Selection (P10-00)
18. Encoder Pulse (P10-01)
19. Encoder Input Type Setting (P10-02)
20. System Control (P11-00)
21. Per Unit of System Inertia (P11-01)
22. ASR1 Low-speed Bandwidth (P11-03)
23. ASR2 High-speed Bandwidth (P11-04)
24. Zero-speed Bandwidth (P11-05)
25. Max. Torque Command (P11-27)
26. Source of Torque Offset (P11-28)
27. Torque Offset Setting (P11-29)
28. Source of Torque Command (P11-33)
29. Torque Command (P11-34)
30. Speed Limit Selection (P11-36)
31. Forward Speed Limit (torque mode)
(P11-37)
32. Reverse Speed Limit (torque mode)
(P11-38)