Delta C2000 Series User Manual page 111

Chapter 7 Optional Accessories
Frame D0
Model MKC-DFKB Capacitor Fan
Applicable model
VFD370C43S/43U; VFD450C43S/43U;
1. Loosen screw 1 and screw 2, press the tab on the right and
left to remove the cover, follow the direction the arrows
indicate. Press on top of digital keypad to properly remove
it. Screw 1, 2 Torque :12~15kgf-cm (8.6~10.4lb-in)
1
3. Loosen screw 4 (figure 3) and disconnect fan power and
pull out the fan. (As shown in the enlarged picture 3)
Screw 4 Torque : 10~12kgf-cm (8.6~10.4lb-in)
Frame D0
Model MKC-D0FKM Heat Sink Fan
Applicable model
VFD370C43S/43U; VFD450C43S/43U;
1. Loosen the screw and remove the fan kit.
2. (As shown Figure 1) Before removing the fan, remove the cover by using a slotted screwdriver.
C2000 Series
2
Figure 1
4
Figure 3
Screw torque: 24~26kgf-cm (20.8~22.6lb-in)
1
2
2. (Figure 2) Loosen screw 3, press the tab on the right and
the left to remove the cover. Screw 3 Torque : 6~8kgf-cm
(5.2~6.9lb-in)
3
4
Figure 1
7-36
3
Figure 2