Delta C2000 Series User Manual page 92

Descriptions of LED Functions
LED
Steady ON: operation indicator of the AC motor drive, including DC brake, zero speed, standby,
restart after fault and speed search.
Blinking: drive is decelerating to stop or in the status of base block.
Steady OFF: drive doesn't execute the operation command
Steady ON: stop indicator of the AC motor drive.
Blinking: drive is in the standby status.
Steady OFF: drive doesn't execute "STOP" command.
Operation Direction LED
Steady ON: the drive is running forward.
Blinking: the drive is changing direction.
Steady Off: the drive is running reversely.
RUN (Green light):
status
Blinking CANopen at pre-operation
CANopen ~"RUN"
Single
ERR (Red light):
status
OFF
Single
flash
Double
CANopen ~"ERR"
flash
Triple
flash
LED
OFF CANopen at initial
CANopen at stopped
flash
ON CANopen at operation status
LED
One message fail
Guarding fail or heartbeat fail
SYNC fail
ON
Chapter 7 Optional Accessories C2000 Series
Descriptions
Green light= Forward
Condition/State
No LED
No LED
Condition/ State
No Error
Bus off
7-17
R
Red light= eversely