Delta C2000 Series User Manual page 335

Gain of Analog Output 1 (AFM1)
Gain of Analog Output 2 (AFM2)
Settings 0~500.0%
It is used to adjust the analog voltage level (Pr.03-20) that terminal AFM outputs.
This parameter is set the corresponding voltage of the analog output 0.
Analog Output 1 when in REV Direction (AFM1)
Analog Output 2 when in REV Direction (AFM2)
Settings 0: Absolute value in REV direction
1: Output 0V in REV direction; output 0-10V in FWD direction
2: Output 5-0V in REV direction; output 5-10V in FWD direction
10V( 20mA)
0V
( 0mA)
03-22=0
03-25=0
Reserve
AFM2 Output Bias
Settings -100.00~100.00%
Example 1, AFM2 0-10V is set output frequency, the output equation is
Output Frequency
10V (
01 - 00
Example 2, AFM2 0-20mA is set output frequency, the output equation is
Output Frequency
20mA (
01 - 00
Example 3, AFM2 4-20mA is set output frequency, the output equation is
Output
4mA 16mA (
This parameter can set the corresponded voltage of 0 for analog output.
Chapter 12 Description of Parameter Settings C2000 Series
03-18
03-21
03-24
03-22=1
03-25=1
Selections for the analog output dir ec ti on
) 03 - 24 10V 03
) 03 - 24 20mA
Frequency
) 03 - 24
01 - 00
12-03-22
10V( 20mA)
F requenc y
0V
( 0mA)
- 27
03 - 27
16mA 03 - 27
Factory Setting: 100.0
Factory Setting: 100.0
Factory Setting: 0
Factory Setting: 0
10V( 20mA)
F requenc y
5V
( 12mA)
03-22=2
03-25=2
Factory Setting: 0.00