Delta C2000 Series User Manual page 217

Coefficient Gain in Actual Output
00-05
Frequency
00-06 Software Version
Parameter Protection Password
00-07
Input
Parameter Protection Password
00-08
Setting
00-09 Reserved
00-10 Control Mode
00-11 Control of Speed Mode
00-12 Point-to-Point Position mode
00-13 Torque Mode Control
00-14 Reserved
00-15 Reserved
00-16 Load Selection
00-17 Carrier Frequency
00-18 Reserved
00-19 PLC Command Mask
Chapter 11 Summary of Parameter Settings C2000 Series
38: Display drive status (6.)
39: Display estimated output torque, positive and
negative, using Nt-m as unit (t 0.0: positive
torque; -0.0: negative torque (C.)
40: Torque Command (L) (Unit: %)
41: KWH display (J) (Unit: kWH)
42: PID Reference (h.) (Unit: %)
43: PID offset (o.) (Unit: %)
44: PID Output Fcmd(Hz) (b.) (Unit: Hz)
45: Hardware ID
0~160.00
Read only
0 65535
0~3: the times of password attempts
0 ~ 65535
0: No password protection / password is entered
correctly (Pr00-07)
1: Parameter is locked
0: Speed mode
1: Point-to-Point position control
2: Torque mode
3: Home mode
0: VF (IM V/f control)
1: VFPG (IM V/f control+ Encoder)
2: SVC(IM Sensorless vector control)
3: FOCPG (IM FOC vector control+ encoder)
4: FOCPG PM FOC vector control + Encoder
5: FOC Sensorless (IM field oriented sensorless
vector control)
6: PM Sensorless (PM field oriented sensorless
vector control)
7: IPM Sensorless (IPM field oriented sensorless
vector control)
0: Relative position
1: Absolute position
0: TQCPG IM Torque control + Encoder
1: TQCPG (PM Torque control + Encoder)
2: TQC Sensorless (IM Sensorless torque control)
0: Normal load
1: Heavy load
Normal load
230V 460V
1-15HP 1-20HP
20-50HP 25-75HP
60-125HP 100-600HP
Heavy load
230V 460V
1-15HP 1-20HP
20-50HP 25-75HP
60-125HP 100-600HP
Bit 0: Control command by PLC force control
Bit 1: Frequency command by PLC force control
Bit 2: Position command by PLC force control
Bit 3: Torque command by PLC force control
11-3
Carrier Frequency
2~15KHz
2~10KHz
2~9KHz
Carrier Frequency
2~15KHz
2~10KHz
2~9KHz
1.00
#.#
0
0
0
0
0
0
0
8
6
4
2
Read
only