Delta C2000 Series User Manual page 112

Frame D
Model MKC-DFKB Capacitor Fan
Applicable model
VFD300C23A/23E; VFD370C23A/23E; VFD550C43A/43E; VFD750C43A/43E;
1. Loosen screw 1 and screw 2, press the on the right and the
left to remove the cover, follow the direction the arrows
indicate. Press on top of digital keypad to properly remove
it. Screw 1, 2 Torque :12~15kgf-cm (10.4~13lb-in)
1
3. Loosen screw 5 (figure 3) and disconnect fan power and pull out the fan. (As shown in the enlarged picture 3)
Screw 5 Torque :10~12kgf-cm (8.6~10.4lb-in)
Frame D
Model MKC-DFKM Heat Sink Fan
Applicable model
VFD300C23A/23E; VFD370C23A/23E; VFD370C43A/43E; VFD450C43A/43E; VFD550C43A/43E; VFD750C43A/43E;
1. Loosen the screw and remove the fan kit.
2. (As shown Figure 1) Before removing the fan, remove the cover by using a slotted screwdriver.
2
Figure 1
Screw torque: 24~26kgf-cm (20.8~22.6lb-in)
1
2
Chapter 7 Optional Accessories C2000 Series
2. (Figure 2) Loosen screw 3, press the tab on the right and
the left to remove the cover.
Screw 3, 4 Torque : 6~8kgf-cm (5.2~6.9lb-in)
5
Figure 3
3
4
Figure 1
7-37
4
3
Figure 2