Delta C2000 Series User Manual page 74

Chapter 6 Control Terminals C2000 Series
When the photo-coupler is using internal power supply, the switch connection for Sink and Source
as below:
MI-DCM: Sink mode
MI-+24V: Source mode
When the photo-coupler is using external power supply, please remove the short circuit cable
between the +24V and COM terminals. The connection mode is Sink mode or Source mode is
according to the below:
The "+" of 24V connecting to "COM: Sink mode
The "-" of 24V connecting to COM: Source mode
Transistor outputs (MO1, MO2, MCM)
Make sure to connect the digital outputs to the right polarity.
When connecting a relay to the digital outputs connect a surge absorber across the coil and
check the polarity.
6-6