Delta C2000 Series User Manual page 208

<Button Type> allows users set up buttons' functions. <Page Jump> and <Constant Setting> are the only
two currently supported functions.
A [ Page Jump ] function setting
Page Jump setting: After you choose the Page Jump function in the drop down list, you will see this
Page Jump Setting Menu
<Function Key> allows you to assign functions to the following keys on the KPC-CC01 keypad: F1,
F2, F3, F4, Up, Down, Left and Right. Please note that the Up and Down keys are locked by
TPEditor. These two keys cannot be programmed. If you want to program Up and Down keys, go to
Tool Function Key Settings (F) Re-Define Up/Down Key(R).
Button Text: This function allows user to name buttons. For example, key in <Next Page> in the
empty space, a button will have the wording <Next Page> displayed on it.
B [ Constant setting ] function
This function is to set up the memory address' value of the VFD or PLC. When pressing the <function
button> set up in before, a value will be written to the memory address of the <Constant Setting>. This
function can be used as initializing a variable.
6. Clock Display Setting
Date can be displayed on the keypad.
Open a new file and click once in that window, you will see the following
In the clock display setting, you can choose to display Time, Day or Date on the Keypad. To adjust time,
go to #9 on the Keypad's menu. You can also adjust Frame Setting, Font Setting and Alignment.
: The setup window of the Clock Display is shown as the image below. Time, Day or
10-33
Chapter 10 Digital Keypad
C2000