Delta C2000 Series User Manual page 190

6. My Mode
Click F4 in parameter
setting page, the
parameter will save to
My Mode. To delete or
correct the parameter,
enter this parameter and
click the "DEL" on the
bottom right corner.
10-15
Chapter 10 Digital Keypad
Items
It can save 01~32 sets of parameters (Pr).
Setup process
1. Go to Parameter Setup function.
Press ENTER to go to the parameter
which you need to use. There is an
ADD on the bottom right-hand corner of
the screen. Press F4 on the key pad
to add this parameter to My Mode
2. The parameter (Pr) will be displayed in
My mode if it is properly saved.
To correct or to delete this Pr. clicks
DEL.
3. To delete a parameter, go to My Mode
and select a parameter which you need
to delete.
Press ENTER to enter the parameter
setting screen. There is a DEL on the
bottom left-hand corner of the screen.
Press F4 on the keypad to delete this
parameter from My Mode.
4. After pressing ENTER to delete <01
Control Mode>, the <02 Maximum
Operating Frequency > will
automatically replace <01 Control
Mode>.
C2000