Delta C2000 Series User Manual page 127

Chapter 7 Optional Accessories
Frame D0&D&E
1. Loosen 8 screws and remove Fixture 2 (as shown in
the following figure).
3. Fasten 4 screws (as shown in the following figure).
Screw torque: 30~32kg-cm (26.0~27.8Ib-in).
5. Fasten 4 screws (as shown in the following figure).
Screw torque: 24~26kg-cm (20.8~22.6Ib-in).
7. Place 4 screws (M10) through Fixture 1&2 and the
plate then fasten the screws. (as shown in the
following figure)
Frame D0/D M10*4
Screw torque: 200~240kg-cm (173.6~208.3Ib-in).
Frame E M12*4
Screw torque: 300~400kg-cm (260~347Ib-in).
C2000 Series
7-52
2. Loosen 10 screws and remove Fixture 1 (as shown
in the following figure).
4. Fasten 5 screws (as shown in the following figure).
Screw torque: 30~32kg-cm (26.0~27.8Ib-in).
6. Fasten 5 screws (as shown in the following figure).
Screw torque: 24~26kg-cm (20.8~22.6Ib-in).