2.
(As shown in Figure 2), remove the power connector, loosen the screw and remove the fan kit. When installing the fan kit,
have the label on the fan kit facing inside of the motor drive.
Screw's torque force: 10~12kgf-cm (8.7~10.4(lb-in)
Frame C
Model MKC-CFKB1 Capacitor Fan
Applicable model
VFD150C23A; VFD185C23A; VFD220C23A
Model MKC-CFKB2 Capacitor Fan
Applicable model
VFD185C43A/43E; VFD220C43A/43E; VFD300C43A/43E
Disconnect fan power and pull out the fan by using flathead screwdriver. (As shown in the larger picture)
Chapter 7 Optional Accessories C2000 Series
Figure
2
Figure
1
7-35