Delta C2000 Series User Manual page 615

Special D
Error code of master error
0: No error
D1074
1: Slave station setting error
2: Synchronizing cycle setting error (too small)
D1075 Reserved
D1076 SDO error message (main index value)
D1077 SDO error message (secondary index value)
D1078 SDO error message (error code L)
D1079 SDO error message (error code H)
The second area is for basic CANopen settings: (the PLC must have
to make settings)
We must set the information exchange time for the master and slave station,
Special D
D1090
Use D1090 to perform settings; setting time relationships include:
For instance, when communications speed is 500K, TXPDO + RXPDO have 8 sets, and synchronizing
time will require more than 4 ms
We must also define how many slave stations will be open. D1091 is the channel for defining station
opening, and D2000+100*n is the station number defining this channel. See the detailed explanation
below.
Slave station number n =0-7
Special D
D1091
D2000+100* n Slave station number
Description of Function
Description of Function
Synchronizing cycle setting
Description of Function
Sets slave station On or Off (bit 0-bit 7 correspond to
slave stations number 0-7)
16-123
PLC Function Applications
R/W
R
-
R
R
R
R
stopped
when this area is used
Default: R/W
4 RW
R/W
RW
RW