Environment For Operation, Storage And Transportation - Delta C2000 Series User Manual

Chapter 9 Specifications

9-3 Environment for Operation, Storage and Transportation

DO NOT expose the AC motor drive in the bad environment, such as dust, direct sunlight, corrosive/inflammable gasses, humidity, liquid and
vibration environment. The salt in the air must be less than 0.01mg/cm
Installation
location
Surrounding
Temperature
Rated Humidity
Environment Air Pressure
Pollution Level
Altitude
Storage
Package Drop
Transportation
1.0mm, peak to peak value range from 2Hz to 13.2 Hz; 0.7G~1.0G range from 13.2Hz to 55Hz; 1.0G range from 55Hz to
Vibration
512 Hz. Comply with IEC 60068-2-6
Impact IEC/EN 60068-2-27
Operation Max. allowed offset angle
Position
position)
C2000 Series
IEC60364-1/IEC60664-1 Pollution degree 2, Indoor use only
o
Storage
-25 C ~ +70
o
Transportation
-25 C ~ +70
Non-condensation, non-frozen
Operation
Max. 95%
Storage/
Max. 95%
Transportation
No condense water
Operation/
86 to 106 kPa
Storage
Transportation
70 to 106 kPa
IEC721-3-3
Operation
Class 3C2; Class 3S2
Storage
Class 2C2; Class 2S2
Transportation
Class 1C2; Class 1S2
No concentrate
If AC motor drive is installed at altitude 0~1000m, follow normal operation restriction. If
it is install at altitude 1000~2000m, decrease 2% of rated current or lower 0.5
Operation
temeperature for every 100m increase in altitude. Maximum altitude for Corner
Grounded is 2000m.
ISTA procedure 1A(according to weight) IEC60068-2-31
o
10 (under normal installation
2
every year.
o
C
o
C
10 10
9-4
of